Concrete Blocks – Manufacturing, Types & Advantages by Mohta Cement

Concrete Blocks are nowadays replacing bricks in masonry construction, especially in many multi-story buildings. They’re available in three types: solid, hollow, and cellular, widely used for building filler walls and boundary walls in RC structures.

Concrete Blocks are usually constructed in larger sizes to hurry up block work and use less cement in joints than brickwork. If the share of voids is quite 25%, they’re hollow blocks, and blocks with voids but 25% are perforated blocks only.

Manufacturing of Concrete Blocks

The BIS recommends a finer modulus of combined aggregate between 3.6 and 4 and coarse aggregates are 6 to 12 mm in size. Lean mixtures up to 1: 8 are commonly used. For concrete blocks, the concrete mix shouldn’t exceed one a part of cement, which is six parts of the combined aggregate volume.

Concrete Blocks are often handmade and may even be machined. The cast block is then covered within the cistern for a minimum of 14 days (the water must be changed a minimum of every 4 days).

After curing, the blocks are dried in 4 weeks before getting used within the construction of masonry. They ought to be piled with voids within the horizontal direction to facilitate easy drying, or they need to be steam-dried.

Types of Concrete Blocks

Hollow Concrete Blocks: Hollow Concrete Blocks are alternatives to traditional bricks and stones in building construction. They’re lighter than bricks, easier to put. Compared to traditional bricks, they provide the advantages of uniform quality, faster construction speed, lower labor participation and longer durability.

Solid concrete blocks: Solid concrete blocks are one among the several precast concrete products utilized in construction. The term precast refers to the very fact that the blocks are formed and hardened before they’re delivered to the work site.

Paver Blocks: Block Paving, also referred to as brick paving, may be a commonly used decorative method of pavement or hardening. The most advantage of bricks over other materials is that individual bricks are often picked up and replaced later.

Advantages of Concrete Blocks

  • Rapid Execution of Work
  • Increase in Floor Area
  • Reduces Construction Cost
  • Better Insulation Properties
  • More Durable
  • Employment of Unskilled Labor
  • Good Bonding of Mortar & Plaster

“Mohta Cement Pvt. Ltd.”, is a well-known Concrete Blocks Manufacturer offered varied construction materials like – Solid Blocks, Paver Blocks,

AAC Blocks, Fly Ash Bricks, and Cement are formed of the best quality. They have created many impressive growth and success records within the market thanks to their commendable product-line, sound facilities, and hard efforts.

For more information you visit their website at – www.mohtacement.com

Top Manufacturer of Fine Fly Ash & Fly Ash Bricks | Mohta Cement Pvt. Ltd.

Fine Fly Ash

Fine Fly Ash is a byproduct of burning coal in electrical power generating plants. During combustion, mineral impurities within the coal (clay, feldspar, quartz, and shale) fuse in suspension and float out of the combustion chamber with the exhaust gases. Because the fused material rises, it cools and solidifies into spherical glassy particles called Fine Fly Ash.

Fly Ash Bricks

Fly Ash Bricks are well-improved quality bricks used for the development of brick masonry structures. They used as a replacement for normal clay bricks and have better properties than it.

How is Fine Fly Ash Powder and Fly Ash Bricks Made?

Fine Fly Ash is a fine powder that obtained as a by-product from the burning of coal in thermal power plants. It contains heavy metals also as PM 2.5 and black carbon. The PM 2.5 found in it spreads through the air within the summer, flying up to twenty kilometers. It freezes on water and other surfaces.

The staples sent to the press machine are sent by the feeder to the trolley in molds made from high grade EN31 material, then pressed from the heavy cylinder to get rid of the Fly Ash Bricks. This machine of Q Green technology is fully automated. This machine is run in auto or manual turn as per requirement.

Uses of Fine Fly Ash & Fly Ash Bricks

  • Additional of mass Concrete
  • Cellular Concrete blocks
  • Fly ash Building Bricks
  • House Construction
  • Factories
  • Warehouses
  • Power Plant

Advantages of Fine Fly Ash & Fly Ash Bricks

  • Better off-shutter finish and aesthetics
  • Improved future strength and sturdiness performance
  • Lower heat of hydration in thick sections
  • Appearance
  • Strength
  • Thermal properties
  • Sound insulation

“Mohta Cement Pvt. Ltd.”, is a well-known Fly Ash Bricks & Fine Fly Ash Manufacturer they made up of the best quality. “Mohta Cement Pvt. Ltd has established its reputation as a number one organization that has consistently set new standards with our innovative research and merchandise development.

Their commendable product-line, sound facilities, and hard efforts of execs have created many impressive growth and success records within the market. With eight decades of experience and expertise, we’ve actively contributed to India’s progress.

If you wish our product or want to shop for, then you can visit our website- www.mohtacement.com

Ready Made Boundary Walls & AAC Blocks Manufacturer in Indore

AAC Block

AAC Blocks are light weight Aerated Autoclave Concrete Blocks. It’s manufactured through a reaction of aluminum and a proportionate blend of lime, cement and ash. During this process, the hydrogen gas that escapes creates many small air cells, rendering AAC with a strong cellular structure.

Boundary Wall

A Boundary wall that’s wont to separate two parcels of land may belong entirely to the owner of 1 parcel of land and be built entirely thereon owner’s land.

If it stands (or rather, wanders) on the border, it’ll be jointly owned by both landowners and may be mentioned as a “Party wall“.

Features of AAC Block & Boundary Wall:

  • Accurate size
  • Straight and powerful edges
  • Low water absorption
  • Quality assurance
  • Dimensional accuracy
  • Unmatched performance
  • Superior quality

Specifications:

  • Pole Dimensions 150mm X 1500mm X length 2.7 meters or 2.4 meters
  • Pole weight: 126 kgs for two .7 mtrs and 112 kgs for two .4 mtrs
  • Panel Dimensions: 300mm wide, 50mm thick 2.1 meter length.
  • Panel weight: 77kgs

Advantages of AAC Block & Boundary Wall:

  • AAC Blocks are three to fourfold lighter than traditional brick; therefore, more suitable and cheaper to move.
  • AAC Block weighs approximately 50% but standard concrete masonry block, and usage reduces the general load of the building thereby allowing construction of the taller building.
  • It improves the aesthetic looks.
  • It provides safety and security of the structure.
  • It reduces the conflict between the landlords

Disadvantages of AAC Block & Boundary Wall:

  • Chance of overturning if the low depth is provided below ground level.
  • High initial cost.
  • AAC blocks are non-load-bearing material; hence it is often used just for partition walls.
  • AAC blocks have brittle nature; therefore, they require more care than clay brick while handling and transporting.

Mohta Cement Pvt. Ltd. Is best Ready Made Boundary Walls and AAC Blocks Manufacturer in Indore. That’s documented as an environment friendly construction material. The finished product is twice the quantity of the raw materials used, making it extremely resource-efficient and environment friendly.

If you would like to shop Ready Made Boundary Walls and AAC Blocks or want to understand more about our products, you can visit our website here – www.mohtacement.com

Advantages of Interlocking Paver Concrete Blocks | Mohta Cement

Interlocking Paver Concrete Blocks is innovative for making decorative pavements. Block paving is the most decorative option for your patio, driveway, and pathway. Block paving, also known as brick paving, can be a commonly used decorative method for making pavements or saws.

There are four generic shapes of paver blocks like the four sorts of blocks as below

  • Type A: Paver blocks with plain vertical faces, which don’t key into one another when paved in any pattern,
  • Type B: Paver blocks with alternating plain and curved/corrugated vertical faces, which key into one another alongside the curve/corrugated faces, when paved in any pattern,
  • Type C: Paver blocks having all faces curved or corrugated, which key into one another alongside all the vertical faces when paved in any pattern and
  • Type D: ‘L’ and ‘X’ shaped paver blocks that have all faces curved or corrugated and which key into one another alongside all the vertical faces when paved in any pattern.

Environmentally sustainable

Compared to other surfacing materials, block piercing is more environmentally sustainable to its porous nature. This suggests that paving will take in rainwater and stop it from collecting on your patio or driveway. The extra advantage is that there’ll be better drainage within the area.

Safety

Interlocking Pavers Concrete Block are very safe pavement materials for outdoor applications. When the side of the paver is oily thanks to the vehicle passing over them, it’s very safe to drive and drive on them. The highest surface of the Interlocking Paver Concrete Blocks is protected during wet or monsoon seasons. There’s no tension of walking or sliding over them. Pewlaters are slip-resistant and skid-resistant.

Low maintenance

Interlocking Paver Concrete Blocks are virtually maintenance-free. They require less energy and resources over their life cycle than concrete or asphalt.

Plus, if a brick is broken or stained with oil, there’s no got to redo the whole driveway or patio. All you’ve got to try to is replace that one brick.

Interlocking pavers Concrete Blocks are designed in order that the paver has ridges on the wall. During installation, special grades and sizes of sand are squeezed between the pavers. They’re going to not shift or sync if installed correctly. They will walk non-stop and advance.

Durability

Mohta Cement Pvt. Ltd. is one of the reputed company in industries, engaged in Interlocking Paver Concrete Blocks in the market. To manufacture these products, experienced professionals make sure to follow the quality assured standards of the industry and use the best grade quality raw material. Also, these products are rigorously checked on different norms of quality, before the final delivery to the clients.

If you want to know more about our products, you can visit at www.mohtacement.com

Best Heavy Duty Paver Block Manufacturers & Suppliers Indore

With rich industrial experience, this organization is deeply engrossed in offering Heavy Duty Paver Blocks. These paver blocks are inspected properly at the top of the time interval as per the instruction of the experts to make sure the quality and flawlessness.

The paver blocks are obtainable in various sizes, designs, and other types. Offered paver block widely utilize in the marketplace for its reasonable prices and quality.

Features:

  • Fine cutting
  • Durability
  • Elegant look
  • Strong design
  • High strength
  • Light weight

Advantages:

  • low maintenance
  • Installation altogether seasons possible throughout the year
  • Higher strength and longer life than other paving materials
  • Major cost savings
  • Reusable after removal for changes to underground utilities
  • Environmentally friendly, because they permit rainwater to flow back to the bottom through sand joints.

Available Thickness:

  • 60 mm
  • 80 mm
  • 100 mm

Application of Product:

The  Heavy Duty Pavers Blocks and Interlocking Pavers are loaded on internal plotting roads, container freight stations, public roads, industrial roads, warehouses, service lanes, building compound, drive-way, corridors, verandas, swimming pools, footpath garages, parking, etc.

Mohta Cement Private Ltd., established in 1984, is one of the leading manufacturer and supplier of wide selection of cement and paver blocks. The merchandise range offered by them includes Heavy Duty Pavers Blocks,  ACC Blocks and Fly Ash Bricks. The Cement and Paver blocks designed from quality assurance materials sourced from reliable and reliable vendors of the industry. Known for seamless finish, lightweight, perfect polishing, contemporary appearance and eye catching design. These Cement and Paver Blocks are designed and polished using advanced polishing and crafting tools.

If you want to buy Heavy Duty Paver Blocks, or want to understand more  about Mohta Cement products,  visit our  website here – http://mohtacement.com/ or contact: 9179100321.

Best Designer Paver Block and Cemented Paver Block Manufacturer In Indore

Paver Block: Designer Paver Block is one of the most popular flexible surface treatment options for exterior pavement applications. These blocks are aesthetically pleasing, comfortable to walk on, extremely durable, and easy to maintain.

Types of Paver Blocks:

1. Concrete Paving Block

2. Clay Paving Blocks

Concrete Paving Block: Concrete Paving Block, also known as brick paving, is a commonly used decorative method to create a pavement. The main advantage of bricks over other materials is that individual bricks can later be lifted up and replaced.

Clay Paving Blocks: This allows for remedial work to be done below the surface of the floor without leaving a permanent mark. Bricks are usually made of concrete or clay, although other composite materials are also used. Each has its own means of manufacture.

Advantages of Paver Blocks:

  • Paver Block does not require special maintenance compared to concrete or asphalt surfaces. Simple water can help keep designer paver blocks clean and bright.
  • Paver blocks are available in different shapes and colors, making them very versatile. These blocks can be used at residential as well as commercial premises.
  • Paver blocks can be used in any weather condition.
  • The most important advantage of Paver Blocks is that they can be easily replaced. If one of the blocks is damaged, it can be easily removed and replaced with another block.

Shapes and Classification of Paver Blocks:

  • Paver blocks with a plain vertical surface that do not interlock with each other when paved in any pattern.
  • Paver blocks having all Surfaces curved or corrugated, which lock into each other along with all the vertical Surfaces when paved in any pattern.
  •  ‘L’ and ‘X’ shaped paver blocks that have all Surfaces curved or corrugated and which lock into each other along with all the vertical Surfaces when paved in any pattern.

“Mohta Cement Pvt. Ltd. ”, Is a well-known manufacturer of construction materials, which is made of superior quality. Mohta Cement Pvt. Ltd ”has created several impressive growth and success records in the market due to its commendable product-line, sound facilities and hard efforts of professionals.

If you want to buy Designer Paver Blocks or other construction materials, you can visit their website.

Website: www.mohtacement.com
Email: info@mohtacement.com
Phone: 9179100321, 9302110997, 07312566003

Best Solid Block Manufacturer and Supplier in Indore, India

Their Solid Blocks are the most preferred option for any type of structural work where high compressive strength, low water absorption and good bonding with plaster/gypsum are the prime considerations. Ideal for use in internal or external walls, block floor systems, Their solid blocks can even be used in foundations, boundary walls and various masonry work including load bearing applications.

Types of Solid Blocks:

Solid Blocks are mainly classified into two types based on structure, size, shape and manufacturing processes.

  • Silod Concret Block: Concrete blocks are commonly used, which are heavy in weight and are constructed from dense aggregates. They are very strong, and provide good stability to the structures. So these concrete blocks are better for heavy masonry work for load-bearing walls. Concrete blocks are available in larger sizes than bricks. So, concrete masonry takes less time to manufacture than brick masonry.
  • Hollow concrete block: Hollow concrete blocks have a void area of ​​more than 25% of the gross area. The concrete area of ​​hollow bricks should be more than 50%. The hollow part can be divided into several components depending on our requirement. They are made of lightweight aggregates. They are light weight block and easy to use.

Mohta Cement Pvt. Ltd. is a leading Solid Block Manufacturer, Dealer, and supplier in Indore, Established in the year 1984. They  provides Solid Block with premium quality of raw materials. They manufacture Solid Block for cement products such as concrete blocks, Solid bricks, mosaic tiles, Interlocking Pavers blocks etc.

They are prominent manufacturer and supplier of  Solid Wall Panel, Pre Cast Compound Boundary Wall, Lightweight Block, Fly Ash Concrete Brick, Gypsum Plaster, Cement, Fly Ash etc.

Popular Products Of Mohta Cement  Pvt. Ltd.

Mohta Cement Pvt. Ltd. created many impressive growth and success records in the market due to its facilities, hard efforts of professionals. For more information about Mohta Cement Private Limited. You can contact them through the details given below.

Web: www.mohtacement.com
Email: Info@mohatacement.com
Mob: 9179100321

Best Precast Concrete Product Manufacturer in Indore, India

The Precast Concrete Boundary Wall is a technology that is stronger, durable, faster installation, and economical than traditional boundary wall, which meets modern requirements. Precast Concrete technology has proved its utility by saving a lot of construction time. The best part of the technology is that it not only speeds up construction, but also enhances the quality of the final production.

Manufacturing Process of Precast Concrete:

A large number of concrete structures (about 6% of the building frame market) are precast. The individual components are prefabricated off-site then taken to the site where they are erected.

The manufacture of concrete is fairly simple. First, the cement (usually Portland cement) is prepared. Next, the other ingredients—aggregates (such as sand or gravel), admixtures (chemical additives), any necessary fibers, and water—are mixed together with the cement to form concrete. The concrete is then shipped to the worksite and placed, compacted, and cured.This is how the concret constraction  process is complited.

Raw Materials Used For The Manufacturing Of Precast Concrete:

  • Calcium
  • Silicon
  • Iron
  • Aluminum
  • Other Row Materials

Features Of Precast Concrete Construction Include: 

  1. Great dimensional accuracy and finishes
  2. Better quality critical elements
  3. Design flexibility
  4. No on-site space for moulds and reinforcement storage
  5. Faster erection at site

Mohta Cement Pvt. Ltd. is proud to introduce itself as a leading manufacturer and suppliers of Precast Compound Boundary Walls. These are made from the finest quality building materials as per the industry laid down norms. They are widely appreciated by customers due to their ability to withstand wide weather conditions, high compressive strength, lightweight, and dimensional accuracy.

In the last 30 years of formation, they have created many impressive growth and success records in the market due to the arduous efforts of professionals. The employees who work with them keep themselves restrained because of the dynamics of the construction and building industry and the latest technology that makes them produce notable products.

If you want more information about Mohta Cement Pvt. Ltd., you can visit their website or contact.

Web: www.mohtacement.com
Email us: info@mohtacement.com
Phone: 9179100321, 9302110997

AAC Blocks Manufacturer & Supplier in Indore, India – Mohta Cement

AAC blocks stand for “Autoclaved Aerated Concrete.” The AAC blocks are the ideal substitute of red clay bricks as the construction material for designing walls. These blocks are primarily used in energy efficient manufacturing and installation.

AAC blocks have excellent properties like it weighs almost 75% less than the conventional red bricks, very good thermal and sound insulation properties. The lightweight feature of these blocks yet high load-bearing capacity has led to its ever-increasing demand. Even more, your cost saving on the construction has increased by more than 40% along with minimal turnaround time.

Manufacturing Process of AAC Block

Autoclaved Aerated Concrete (AAC)  manufactured by a process involving the mixing of fly ash, cement, coarse sand, fine sand, and a forming agent in a mixer to form a thin slurry. The slurry is then poured into molds and allowed to set. The blocks are then removed from the molds and are cured by spraying water on the stack. They can be cured by Autoclaving with steam.

The Process is carried out in the Following Steps.

  • Raw material preparation
  • Dosing and mixing
  • Casting, Rinsing and Pre-curing
  • Remolding and cutting
  • Entering autoclave
  • Packing and loading

Features of AAC Block:

  • Smooth finish & Accurate in size
  • Easy Workability and design flexibility.
  • Light in weight which reduce total structure cost
  • Eco friendly and sustainable
  • High durability
  • Low water absorption
  • Good sound installation
  • Earthquake, Weather & Fire-resistant

Backed by an experienced and expert team of Mohta Cement Pvt. Ltd.  is a leading manufacturer and supplier of Lightweight AAC Block, which is well known as an environmentally friendly construction material. The finished product is twice the volume of the raw materials used, making it extremely resource-efficient and environmentally friendly.

The energy consumed in the production process is only a fraction compared to the production of other materials. These AAC Blocks are available in various ranges keeping in mind the requirements of clients.

If you want to buy AAC block, or want to know more details about Mohta Cement Pvt. Ltd. products you can visit their website here – www.mohtacement.com or call today at 9179100321.

Best Fly Ash Powder Dealer, Manufacturer and Supplier in Indore

Fly Ash is a heterogeneous by-product material produced in the combustion process of coal used in power stations. It is a fine gray colored powder having spherical glassy particles that rise with the flue gases. As fly ash contains pozzolanic materials components which reach with lime to form cementations materials. Thus fly ash Powder is used in dams, mines, concrete, and landfills.

The Major uses of fly ash powder are listed below:

  • Fly ash used in the manufacturing of Portland cement.
  • It is used as a stabilization material.
  • Fly ash has used as a component in the production of flow-able fill.
  • It is Used in roller compacted concrete dams.
  • Fly ash used in the manufacturing of fly ash bricks.
  • Fly ash is treated with silicon hydroxide, it acts as a catalyst.

Mohta Cement Pvt. Ltd. is a leading Fly Ash Powder Dealer, manufacturer and supplier in Indore, Established in the year 1984. They are provides fly ash powder with premium quality of raw materials. They manufacture fly ash powder for cement products such as concrete blocks, bricks, mosaic tiles, Interlocking Pavers blocks etc.

They are prominent manufacturer and supplier of Solid Wall Panel, Pre Cast Compound Boundary Wall, Lightweight Block, Fly Ash Concrete Brick, Gypsum Plaster, Cement, Fly Ash etc.

Advantages of fly ash powder summarized as follows:

  • Fly ash Reduced water content for given workability or improved workability at the same water content
  • Fresh mixes of fly ash, pump more easily and workability retention is more dependable
  • Better off-shutter finish and aesthetics
  • Fly ash Improved long term strength and durability performance
  • Low porosity and shrinkage  as a result of the lower water content
  • Low permeability and better resistance to sulfate attack  and chloride ingress
  • Low heat of hydration in thick sections
  • Fly ash  Reduced alkali silica reactivity

Most Popular Product of Mohta Cement Pvt. Ltd.

Mohta Cement Pvt. Ltd. Made several impressive growth & success records in the market due to their sound facilities, hard efforts of professionals. For more information about Mohta Cement Pvt. Ltd. you can contact via below details.

Web: www.mohtacement.com
Email us: info@mohtacement.com
Call us:  9179100321, 9302110997, 07312566003

Design a site like this with WordPress.com
Get started